Get in touch: sales@safefence.co.uk

VAT Display

Edge Protection Footing

SKU
MP7239

Edge Protection Footing

SKU
MP7239
As low as £15.50 £18.60
In stock
 

Our standard connection is the most commonly used fixing for anchoring the foot to the top of the slab. This is to be used on flat-levelled surfaces at the slab edge. There are four supporting points on the standard foot which allow for the load to be distributed evenly across the footing & they are secured using an anchor bolt. This foot is a simple way to provide a solid footing for your edge protection post & Complies with EN 13374, Class A.

The Safe Fence edge connection positions the posts of your edge protection 100mm off the face. This is beneficial as it provides access for edge finishing to be completed safely. This system complied to EN 13374, class A & is commonly used when erecting edge protection barriers on precast concrete slab edges & stairs. The edge connection is fitted using a single fixing and remains stable by spiking the concrete when tightened.

Fixing Selection:

All fixings should be confirmed as suitable for the chosen application site.

Material type and thickness, edge proximity, depth of embedment, and proximity to other fixings, all impact the strength of a fixing. Please refer to manufacturer’s instructions for fixing guidance and limitation.

The dimensions for installation and the load capacity should be confirmed by the fixing manufacturer for each application.

Competent fixings advice should be sought if in any doubt.