Portable Steel Site Hoarding Panels are a cost effective way of adding security and privacy to your site.
Portable steel hoarding panels are connected to one another using fence clips (couplers). We advise using two couplers per connection, on at the top of the panel and one at the bottom, in order to ensure that the system is well connected. The panels are made up of 38.1mm tube on either side. The tube extends beyond the bottom of the panel allowing them to be slotted directly into rubber block fence feet. These feet will support the panel, ensuring that it stays in place and does not slip or easily fall over.
There are further accessories for improving your portable hoarding system.
Access control: you can allow pedestrians to gain access through the portable hoarding system by inserting a standalone pedestrian gate or a built-in portable hoarding security gate. For vehicles you can look at inserting a portable hoarding vehicle gate or a more robust heavy duty vehicle gate system.
As portable hoarding is often the first image that civilians will get of a new construction project many want to make the very best impression they can and ensure the site is as ascetically pleasing as possible, while retaining a high degree of privacy and security. In order to do this there are a number of options that you can look at. Firstly you can have your portable steel hoarding system painted or powder coated in your corporate colours. You can add bottom, middle and top strips across the panel to further improve the appearance. You can also look at using colour co-ordinated infills and ground skirts. These will give you the image you want while ensuring that there are no gaps in your temporary hoarding system, securing civilians from flying debris and increasing the privacy of your project. Ground skirts cover the gap between the bottom of the panel and the floor, whereas vertical infills fill the gap in-between temporary fence hoarding panels.
A steel hoarding system can also be re-enforced using in-ground hoarding stabilisers or a stabiliser and block tray system. This makes the temporary fencing system more secure in adverse weather conditions. We suggest using a stabiliser every other hoarding panel connection, although you can use one on every connection for use in area that suffer from particularly poor weather conditions.
Site Hoarding Installation
Although Safe Fence do not offer an installation service for steel site hoarding, we may be able to point you in the right direction of a few trusted installation teams. If you need installation of your construction hoardings or just some advice on how to install portable hoarding, or other forms of temporary fencing, then just reach out to a member of our team - we'd be happy to help!
Width: 2.1 meters
Height: 2.0 meter / 2.4 meter
Weight: 30 / 40 kg
Finish: Galvanised / Painted (one side) / Powder coated (one side)
0.75mm thick profiled steel cladding - two sheets overlapped in the middle of the hoarding panel and secured together with two rivets
Tek screws and spot welding secure the steel cladding to the outer frame
Channel 43mm x 35mm x 1.2mm top & bottom (8mm lip on rear to hold cladding in place and prevent rattling) - the steel channel running along the top and bottom of our portable hoarding panels are notched so that they sit tightly around the tubes running up either side of the steel fence panel, allowing for a stronger connection. They also have an outlet for water to increase the longevity of the panel and help guard against rusting.