Details
The Protek 868 Rebound mesh fence system has been designed for use around multi-use ball game areas. The standard panel is 2.0m high with the wire spacing on the lower 1200mm of the panel being 66.6 x 50mm and the remaining 800mm above being 200 x 50mm. The closer wire centres on the lower part of the panel give it high rebound properties, helping the ball to rebound back into the court.
Specification
- Mesh panel - mesh size 66.6 x 50mm up to 1200mm high then wire spacing at 200 x 50mm - 1 x 6mm vertical and 2 x 8mm horizontal wire
- Post size varies with height (see table)
- Clamp bar 40 x 5mm at bar (full length of mesh panel)
- Plastic cap varies with post size
- M8 x 40 Stainless steel security screw
Nominal Fence Height (m) |
Panel Size Height x Width (mm)
|
Post Size (mm) Ends/Iners
|
Post Size (mm) |
Overall Length of Post (mm)
|
Number of Fixings
|
Internal Corner |
External Corner |
Ends/Inters (1 Clamp)
|
Corners (2 Clamps)
|
2.0 |
2,030 x 2,506
|
60 x 40 |
60 x 40 |
60 x 60 |
2,700 |
9 |
18 |
2.4** |
2,400 x 2,506
|
60 x 40 |
60 x 40 |
60 x 60 |
3,200 |
10 |
20 |
3.0 |
3,030 x 2,506
|
80 x 40 |
80 x 40 |
80 x 40 |
3,900 |
12 |
24 |
4.0* |
4,060 x 2,506
|
100 x 50 |
100 x 50 |
80 x 80 |
5,100 |
16 |
32 |
5.0* |
5,060 x 2,506
|
100 x 50 |
100 x 50 |
80 x 80 |
6,200 |
21 |
42 |
6.0* |
6,080 x 2,506
|
120 x 60 |
120 x 60 |
100 x 100 |
7,500 |
24 |
48 |
Posts, Clamps and Fixings
The posts and full-length clamp bars that Alexandra Security Limited offers provide a fixing system which secures the panels but allows for variations. The system is easy to install and allows the panels to be stepped, helping the fence line to follow the contours of the ground. With the vandal resistant security fixings this post and clamp system provides a higher level of security than the traditional clip system.
Product and Finish Standards
- Mesh panel wire manufactured to BS 4102 and galvanised to BS EN 10244-2:2001 class D, weld strength is 75% of the minimum tensile strength of the wire (tensile range 540-690 N/m2)
- Post material manufactured to BS EN 10210-2:1997 and galvanised to BS EN 10346:2009
- Panels & Posts are powder coated to BS EN 13438:2005 (min 100 micron)